| |
|
1 |
Go to Buildings Page
Go to www.cui.edu/printing/buildings.html |
| |
|
2 |
Select the building
Select the building where the printer
is that
you need to install |
| |
|
3 |
Select the floor
Select the floor of the building
(Note: if there is only one floor, this step will be automatically skipped and go to step 4) |
| |
|
4 |
Determine which printer you want
Click on the "install printer" icon that corresponds to
the printer you want to install (Note: icons are no longer hyperlinks. Scroll down below the map to select the corresponding "Install Printer" links) |
| |
|
5 |
Click the “Open” button
Click the “Open” button for the
security warning that pops up
 |
| |
|
|
| |
|
6 |
Click the “Run” button
Click the “Run” button for the next security warning
 |
| |
|
7 |
Set printer as default printer
You will be asked if you want to make this your
default printer. Select "Yes" or "No" depending on whether or not you want this to be your default.
The default can be changed in the Printers folder. |
| |
|
8 |
The Printer is now installed
Your local "Printers and Faxes" folder should
open, and the printer should appear in it. |
| |
|
9 |
Remove old printers
Right-click any old printers you will no longer use and select “Delete” to remove them |
| |
|
| |
Note: For all of the 3115cn printers, installing the printer will also install the fax printing support. Check to make sure your fax printer has a fax line installed before trying to fax |
| |
|
|
|
